Generally responsible for Block production line process development, capital projects, optimizing production process, improve the production line capacity in efficiency, reduce production cost, improve& increase the products quality.

主要负责板材生产线工艺开发，投资项目，生产线优化生产工艺，改善及提高生产线产能提升及效率，降低生产成本，改善及提高产品质量。

?Experience in Maintenance with good machine knowledge and preferably within process;

具备优秀的设备维修经验， 有工艺经验尤佳；

?Knowledge in Siemens S7 TIA Portal is an advantage, otherwise other experience with PLC and automation is good；

有自动化经验，懂 Siemens S7 TIA Portal尤佳；

?Electrical knowledge, reading electrical diagrams, troubleshooting in electrical cabinets etc；

懂电气知识，能看懂电气图纸，具备实际解决现场问题的动手能力；

?Leading the block production line process conscious improvement and development;

负责Block生产线生产工艺持续改进及开发；

?Responsible for block production line new process, new products and new operation method of development；

负责Block生产线新工艺，新产品，新操作方法的开发；

?Analysis block line any process& technical issue; take the appropriate action or countermeasure to support the production. ；

分析Block生产线工艺及技术问题，采用适当行动或对策支持生产线；

?Check and track block line production situation、factory capacity analysis and capacity/capability plan and arrangement；

检查跟踪Block线生产状况，工厂能力分析以及能力/能力计划及安排；

?Develop& update SOP /WI document best practices to be used by production operator

开发/更新作业指导书用于生产操作员的***方法；

?Provide technical support for new investment project in the implementation of technology, process optimization, cost improvements, process simulations, troubleshooting, new production line start-ups, etc；

为新投资项目提供技术支持，实施技术，工艺优化，成本改善，工艺演算, 处理故障及新生产线的启动；

?Improve process efficiencies including First Pass Quality, Productivity,

改善工艺效率包括首次通过率，产能等；

?Responsible for the equipment layout and optimization;；

负责Block车间工艺布局规划和优化；

?Responsible for process requirement of equipment, participate in making the specification of new equipment, supplier assess, control of equipment manufacturing, FAT, installation commissioning and SAT for Block equipment;；

提供设备的工艺要求,参与新设备的技术要求制定、供应商评估、设备制造过程控制、交货前验收、安装、调试、验收工作

?Other tasks assigned by manager;经理分配的其他任务；

任职要求：

?Above Bachelor degree in industry engineering , automatic mechanical manufacturing engineering or equivalent discipline;

本科以上学历，工业工程，机械自动化工程及类似专业；

?Above 5 years working experience in MFG industry, minimum above 3 years as process engineering& process development experience is a must;

5年以上制造业经验，至少3年以上工业工程及工艺开发工作经验；

?Knowledge and experience of 5S, visualization management are required, lean production and Six Sigma experience is a priority;

具备5S，可视化管理的知识及经验，具备精益生产及六西格玛经验者优先；

?Good Analytical Skill and hands on trouble shooting 良好的分析能力和故障解决的能力

?Good at problem solving skill for all process related issues. 良好的工艺相关的问题解决能力

?Required knowledge, skills and abilities 必备的知识、技能和能力

?Be good at processing/designing of mechanical products, be able to workout documents for processes; be good at industrialization of new products, be able to calculate cycle time and capacity；

擅长机械产品的工艺设计，制定工艺文件，擅长新产品工业化，能计算产品周期及工程能力；

?Be familiar with production line’s layout and design；熟悉生产线布局及设计；

?Driving improvements and have a positive approach to work；推动改进，工作积极；

?Must be able to make fast and accurate decisions 具备快速做决定的能力；

?Must be results oriented with ability to handle multiple complex tasks simultaneously

具备结果导向下的多重复杂工作任务的能力

?Lean/Six Sigma Greenbelt knowledge 具备精益及六西格玛绿带的知识；

?Strong co-operation and team spirit ；强有力的合作及团队精神；

?Good English written and verbal communication skills；良好的英语口语及书写能力，沟通能力好；

?Proficient in computer skills；熟练使用电脑；

?Task driven with high degree of integrity, highly motivated;积极诚实推进工作；

?Be able to work under pressure and high sense of responsibility.能承受工作压力，责任感强；

上班地址：张家港市扬子江国际化学工业园南海路56号

戴铂新材料有限公司系瑞典戴铂集团，自2005年在中国成立的全资子公司，戴铂集团成立于1950年，总部设立在瑞典的Laholm城市，公司持有人是瑞典的Ratos公司，距今已有60多年的历史。Diab is a wholly owned subsidiary established by Sweden Diab Group in China in 2005. Diab Group was established in 1950 and headquartered in Laholm, Sweden. The company was held by Ratos, a Swedish company with a history of more than 60 years.

瑞典戴铂集团作为世界著名的芯材制造商，一直居于业界领导地位。以泡沫芯材为主的“三明治”夹芯复合材料正日渐占据材料市场的主导地位，它以高强度、低重量、阻燃、抗腐蚀、绝缘、隔音降噪等性能及可回收再利用被广泛应用于风能-风力发电、航空、船舶、交通运输、建筑、工业等各种领域。戴铂在独一无二的市场中拥有独一无二的地位，戴铂公司的产品目标是“让客户的产品更强、更轻和更具智慧”。 As the world-renowned manufacturer of core materials, Sweden Diab Group has always been the industry leader. The company’s sandwich composite materials mainly composing of foam core are increasingly dominated the market, which are widely used in wind energy/wind power, aerospace, transportation, construction, industry, etc. with their high strength, low weight, flame-retard, anti-corrosion, insulation, sound insulation, noise reduction and recyclability. Diab has a unique position in a unique market and its product goal is to “make customers’ products stronger, lighter and more smart.”

戴铂集团在四大洲都设有生产基地和制造工厂如：瑞典、意大利、美国、立陶宛、厄瓜多尔、中国等等，并在全球拥有两个研究发展中心。除此之外，它在世界各地有十六个销售公司和众多当地的分销商，从而可以为全球的顾客提供近距离的支持与服务。Diab Group has production bases and manufacturing plants in four continents, such as in Sweden, Italy, the United States, Lithuania, Ecuador, China, etc., and has two research and development centers around the world. In addition, it has 16 worldwide sales companies and numerous local distributors, which can provide close support and services for global customers.

戴铂集团2015年在中国投资成立了戴铂新材料（张家港）有限公司。随着业务量的快速增长,戴铂现已成为戴铂集团在亚太地区乃至全球最重要的业务拓展及战略生产基地. Diab Zhangjiagang factories are invested and established separately in 2015. With the rapid growth of Diab businesses in China, Diab has become the most important base as business development and strategic production for Diab Group in Asia Pacific and even the world as a whole.

为了迎接新的挑战和机遇，目前戴铂张家港公司真诚欢迎每一位对未来充满理想，对自己充满信心的有志之士的加盟，我们承诺： 努力于员工有竞争力的薪资福利、倾力于打造员工广阔的发展空间、尽力于员工应享有的人性化待遇。

如果您有意向，请将您的中英文应聘资料(请注明期望薪资和应聘职位)发送给如下对应的邮箱：
anne.chen@cn.diabgroup.com

诚挚聘才！